TM 10-3510-222-24
3-32. CHASSIS CONTROL- continued.
(5) Interval Timer (25).
(a) Remove twelve screws (3) from cover (4) and remove cover (4).
(b) Tag and remove electrical wiring to interval timer (25).
(c) Remove screw (24) from interval timer (25).
(d) Remove interval timer (25).
(e) Position new interval timer (25) on chassis control (9) and install screw (24).
NOTE
Wire numbers are stamped on each electrical wire. This information, in conjunction with data on
FO-2 Washer Wiring Diagram, may be used to connect wires if tags are lost or illegible
(f)
Connect electrical wiring to interval timer (25).
(g) Position cover (4) on control console (8) and install twelve screws (3).
(6) Relay (27).
(a) Remove twelve screws (3) from cover (4) and remove cover (4).
(b) Tag and remove electrical wiring to relay (27).
(c) Remove two screws (26) from relay (27) and remove relay (27).
(d) Position new relay (27) on chassis control (9) and install two screws (26).
NOTE
Wire numbers are stamped on each electrical wire. This information, in conjunction with data on
FO-2 Washer Wiring Diagram, may be used to connect wires if tags are lost or illegible
(e) Connect electrical wiring to relay (27).
(f)
Position cover (4) on control console (8) and install twelve screws (3).
(7) Movement Timing (29).
(a) Remove twelve screws (3) from cover (4) and remove cover (4).
(b) Tag and remove electrical wiring to movement timing (29).
(c) Remove two screws (28) and remove movement timing (29).
(d) Position new movement timing (29) on chassis control (9) and install two screws (28).
NOTE
Wire numbers are stamped on each electrical wire. This information, in conjunction with data on
FO-2 Washer Wiring Diagram, may be used to connect wires if tags are lost or illegible
(e) Connect electrical wiring to movement timing (29).
3-76
