TM 10-3510-222-24
3-32. CHASSIS CONTROL.
This task covers:
a.
Removal
b.
Repair
c.
Installation
INITIAL SETUP
Tools
General Mechanics Tool Kit (App B, Item 1)
Electrical Repair Shop Equipment (App B, Item 4)
Materials/Parts
Adhesive (RTV) (App D, Item 1)
Tags (App D, Item 4)
Tiedown Straps (App D, Item 11)
Equipment Condition
Laundry Unit shut down (TM 10-3510-222-10)
Control Console and Pressure Switch removed
(Para 3-29)
General Safety Instructions
WARNING
High
voltage
is
present
on
this
equipment. Do not perform maintenance
with power on. Death or serious injury
may result.
a.
REMOVAL
(1)
Remove four nuts (5) and flat washers (6) from bolts (2) which protrude through the control stand (1).
(2)
Tag and remove electrical wiring to chassis control (9).
(3)
Remove chassis control (9) and washers (7) from control console (8).
(4)
Remove four nuts (10) and bolts (2) from chassis control (9).
b.
REPAIR
(1) Relay(s) (12).
(a)
Remove twelve screws (3) from cover (4) and remove cover (4).
(b
Release two clips (11) from relay(s) (12) and remove relay(s) (12).
(c)
Install new relay(s) (12) in socket(s) (13).
(d)
Connect two clips (11) on relay(s) (12).
(e)
Position cover (4) on control console (8) and install twelve screws (3).
3-73
