TM 10-3510-222-24
3-78. DRYER CONDUITS.
This task covers:
a.
Removal
b.
Repair
c.
Installation
INITIAL SETUP
Tools
General Mechanics Tool Kit (App B, Item 1)
Automotive Vehicle Shop Equipment,
(App B, Item 3)
Material/Parts
Tags (App D, Item 4)
Equipment Condition
Dryer shut down (TM 10-3510-222-10)
General Safety Instructions
WARNING
Voltage in this equipment is high enough to cause
serious injury or death. Do not perform this task
with power on.
a.
REMOVAL
(1)
Tumbler Motor - Base Control Box Conduit.
(a)
Tag and disconnect wires ( wire #19, #20 and #21) at relay (10).
(b)
Remove nut (1).
(c)
Pull adapter (2) with attached parts from electrical enclosure.
(d)
Remove gasket (3) from adapter (2).
(e)
Loosen two screws (4) from tumbler motor (9) and remove cover (5).
(f)
Tag and disconnect wires from tumbler motor (9).
NOTE
Disconnecting wires, combining only motor wires (T4, T5 and T6) is not necessary to replace
conduit.
(g)
Remove locknut (6) and pull adapter (7) with attached parts away from tumbler motor (9).
(h)
Remove gasket (8).
3-182
