TM 10-3510-222-24
3-79. DRYER BASE-continued.
(3)
Apply adhesive to insulation sheet (11) and install on the side of base (17) behind the dryer control panel.
(4)
Install two solid rivets (10).
(5)
Install chain (8) on door (9) with rivet (7).
(6)
Install gasket (6) and cover (2) on base (17).
(7)
Position chain (8) on base (17) and install rivet (5).
(8)
Install hinge (4) on cover (2) with five rivets (1).
(9)
If required, install captive screws (12) onto control box cover (2) using Installation Fastener Tool.
(10)
Place control box cover (2) on base (17) and secure with three captive screws (12).
(11)
Install hinge (4) on base (17) using five rivets (3).
(12)
Install electrical components (Paras 3-63 thru 3-70).
(13)
Install panel (Para 3-63).
(14)
Install dryer cylinder (Para 3-77).
Figure 3-80. Dryer Base
3-188
