TM 10-3510-223-13&P 0028 00
CONTAINERIZED SELF SERVICE LAUNDRY (CSSL) MODEL A
UNIT MAINTENANCE
0028 00-1
WATER HOSES
THIS SECTION COVERS:
Inspect, Repair, Replace
INITIAL SETUP
Water hoses disconnected
Materials/Parts
Maintenance Level
Wiping Rags (WP 0072, Table 1, Items 1)
Unit
Gasket (WP 0072, Table 1, Item 4)
Tools and Special Tools
Gasket (WP 0072, Table 1, Item 5)
Tool Kit General Mechanic (WP 0045, Table 2, Item 1) Hose Clamp (WP 0072, Table 1, Item 18)
INSPECT
Inspect freshwater and wastewater hoses for material damage, leaks, frayed material, presence of
gaskets, and proper operation of Quick Disconnect (QD) hose couplings. Repair a hose by replacing a
gasket or QD coupling half as required and described below. Replace an entire hose when damaged
beyond repair.
WARNING
Keep freshwater and wastewater hoses separate at all times. Do not
switch components such as seals or coupling halves between freshwater
and wastewater hoses as this may result in health hazards due to
biological contamination.
REPAIR
Repair hoses by replacing gaskets in female coupling halves and QD coupling halves as follows:
To replace a gasket, use needle-nose pliers, to remove the gasket (1) from female QD coupling half (2).
Ensure entire gasket is removed, and groove (3) is clear. Use needle-nose pliers, to install new seal.
1
2
3
