TM 10-4510-2078-16
GENERAL SUPPORT MAINTENANCE INSTRUCTIONS
6.1. POWER CABLE ASSEMBLIES REPAIR.
This task covers: Repair
INITIAL SETUP
Equipment Conditions:
Tools:
Welding Tool Set (Appendix B, Section III, Item 4)
All components removed from pump assembly frame.
Materials/Parts:
NOTE
Repair is limited to welding any crack or broken seams as well as any
dents or bends in the assembly frame.
Repairs.
(1) Repair any minor dents or bends in the frame using common sheet metal repair procedures.
(2) Remove paint from any surface being welded then repair using common welding procedures.
(3) Paint any welded surfaces, or areas where paint has been removed, using lusterless enamel
paint as necessary.
6-1/(6-2 blank)