TM 10-4510-209-13&P
DIRECT SUPPORT MAINTENANCE
CONTAINERIZED LATRINE SYSTEM (CLS)
(NSN 4510-01-477-7764)
30 GPM WATER PUMP ASSEMBLY
REPAIR, REPLACE
INITIAL SETUP
Tools
Personnel Required
General Mechanics Tool Kit (Item 5, WP 0072 00)
One
Pipe Wrench (Item 2, WP 0072 00)
Materials/Parts
Equipment Condition
Anti-seize tape (Item 42, WP 0118 00)
Main water valve in CLOSED position.
Pipe Sealant (Item 6, WP 0118 00)
Shut down water supply and drain
Wire Markers (Item 55, WP 0118 00)
system. Water heater circuit breaker
(#2B CLS/ #8 CL) and water pump circuit
breaker (#9/11 CLS) set to the OFF
position.
REPAIR
Repair Leaks at Pipe Connections
NOTE
It may be necessary to cut sections of PVC pipe in order to repair a leak. If PVC pipe is
cut, refer to WP 0065 00 for repair procedures.
1. Use a pipe wrench to disconnect leaking pipe connections (1).
2. Clean disassembled pipe fittings (2).
3. Coat connections with pipe sealant.
4. Reassemble and tighten pipe connections (1).
5. If leak persists, replace pipe fittings (2) as necessary.
0067 00-1
