TM 10-8400-203-23 Change 11 27-17 h. Pouches. ITEM (NSN) SIZES SPECIFICATION 40mm HE Single 8465-01-465-4416 One Size PD-02-02 40mm HE Double (8465-01-465-4417 One Size PD-02-02 40mm Pyrotechnic Double (8465-01-465-4445) One Size PD-02-02 Pouch, Grenade, Hand (8465-01-465-2093) One Size PD-02-02 Pouch, Canteen (8465-01-484-0450) One Size PD-02-02 Pouch, Magazine, Double (8465-01-465-2092) One Size PD-02-02 Pouch, Utility (8465-01-465-2070) One Size PD-02-02 Pouch, 9mm Magazine (Single) (8465-01-465-2155) One Size PD-02-02 Pouch, 200 Round, SAW (8465-01-465-2263) One Size PD-02-02 The body of the 40mm HE single grenade pouch is constructed of two pieces of textured nylon duck cloth conforming to MIL-C-43734 (1), using Size F Thread conforming to V-T-295 (2). The front piece, which is slightly larger, is sewn onto the back piece forming pleats that create a pocket. The edges of the pouch are lined with 1- inch-wide binding tape conforming to MIL-T-5038 (3) using Size E Thread conforming to V-T-295 (4). Snap fastener eyelets and studs conforming to drawing 4-1-178 (81337) (5) are installed at the ends of the closure and attaching straps. Two lengths of 1-inch webbing conforming to MIL-W-43668 (6) are sewn to the back of the pouch and bartacked using Size E Thread (4) to serve as attaching points. An attaching strap of the same material, and enclosing a length of polyethylene conforming to (L-P-378D) (7), is sewn onto the top of the pouch and behind the 2-inch webbing. An eyelet/stud combination conforming to Drawing 4-1-178 (81337) (8) is sewn to the bottom of the pouch to meet with the eyelet on the attaching strap. A length of 2-inch webbing conforming to MIL-W-4088 (9) is sewn to the top front of the pocket to serve as closure. The 40mm HE and pyrotechnic double pouches are constructed in the same manner, except for dimensional differences.   27-3. IDENTIFICATION AND DESCRIPTION - Continued