TM 10-8465-237-10
OPERATOR INSTRUCTIONS
OPERATION UNDER USUAL CONDITIONS MMK SNOWSHOES
DONNING/DOFFING
INITIAL SETUP:
Personnel Required
Equipment Condition
Mountaineer (1)
Clean
DONNING
1. If desired, attach the 8-inch tail as follows:
a. Loosen knob (Figure 1, Item 1) until it stops turning.
3
2
1
4
Figure 1. Attaching Snowshoe Tail.
b. Engage posts (Figure 1, Item 3) on back of snowshoe with holes (Figure 1, Item 2) on tail.
c. Firmly push tail into snowshoe, to stop position.
d. Hand-tighten knob.
2. Insert boot under straps. Toe of boot should remain behind bolts (Figure 1, Item 4).
3. Tighten four straps, starting from toe to heel, engaging strap holes with appropriate metal posts for
snug fit (Figure 2).
Figure 2. Snowshoe Straps.
