TM 10-8465-237-10
0025
INSTALL CONTINUED
2.
Use the anchor aperture (the large hole at the top of the pulley) to attach the pulley (Figure 2) to
an anchoring rope or fixed point.
Figure 2. Front View of Pulley.
3.
Remove rope from pulley by pulling the trailing end of the rope back through the wheel well.
Alternately, twist the plates of the pulley away from each other to allow immediate removal of a
looped rope, as shown in Figure 3.
Figure 3. Pulley with Plates Twisted.
END OF TASK
END OF WORK PACKAGE