TM 10-1670-300-20&P
TO 14D1-2-469-2
NAVAIR 13-1-42
Location
Interval
Procedure
Not Fully Mission Capable If:
Item No
Item to
Check/Service
Arming Pin
Inspect lanyard (1) for three inch Lanyard (1) Is not present or
Assembly
loop of type III nylon cord.
not serviceable. Knob (2) Is
(Attached)
Inspect knob (2) for cracks,
cracked. Swedge (3) is not
chips. Inspect swedge (3) for
secure or upper portion of
proper attachment. Ensure no
cable (4) has broken strands.
strands of cable (4) are broken.
Cable (4) is not visible in
Look for cable in inspection hole
inspection hole (5). Knurled
(5). Inspect knurled nut (6) for
nut (6) is cracked or missing
cracks and ensure two studs are stud. Spring (7) is corroded
present. Inspect spring (7) for
or lacks tension. Arming pin
proper tension and lack of
guide bush (8) is not properly
corrosion. Inspect arming pin
seated.
guide bush (8) is properly seated
and tight.
2-10
