TM 10-3510-209-24
2-44. DRYER COMBUSTION BLOWER AND MOTOR ASSEMBLY
This task covers:
a. Inspection
b. Removal
c. Repair
c. Installation
Initial Setup:
Tools
General Safety Instructions
General mechanic's tool set,
SC 5180-90
WARNING
Personnel Required
High voltage is present on this equipment.
Do not perform maintenance with power on.
MOS 63J (1)
Death or serious injury may result.
Materials/Parts
Equipment Condition:
Blower assembly
TM 10-3510-209-10, Tarp assembly removed.
Identification tags
(Item 12, App C)
INSPECTION
WARNING
High voltage is present on this equipment. Do not perform maintenance with
power on. Death or serious injury may result.
Inspect blower and motor assembly for proper operation and look for damage.
REMOVAL
1.
Disconnect electrical power from the dryer.
2.
Loosen two screws (1) and remove electrical cover (2) from the back of motor (3).
NOTE
Record wire removal so that installation of wires on the replacement motor is
exactly duplicated.
3.
Tag and disconnect electrical wires from terminals and connectors.
4.
Remove conduit (4) with wires and conduit connector from motor (3).
2-158
