TM 10-3510-209-24
2-44. DRYER COMBUSTION BLOWER AND MOTOR ASSEMBLY (CONT)
INSTALLATION (Cont)
4.
Tighten setscrew (16) and secure impeller (13).
5.
Align and install coupling (15) on the impeller
shaft. Tighten setscrew (14).
NOTE
It may be necessary to turn the motor
shaft by hand to align the coupling
and the fuel pump shaft.
6.
Align fuel pump coupling (15) with the fuel pump
shaft in blower housing (8). Insert impeller
motor plate (7) and motor (3) into housing.
7.
Secure motor plate (7) with lockwashers (6) and
bolts (5).
8.
Loosen two screws (1) and remove electrical
cover (2) from the back of motor (3).
9.
Route the electrical wires into the motor and
install conduit (4) on motor (3).
10.
Connect the electrical wires to the terminals and
connectors on the motor. Remove tags.
11.
Install electrical cover (2) on the back of motor (3) and secure with two screws (1).
12.
Check for proper direction of rotation.
NOTE
FOLLOW-ON MAINTENANCE:
Install tarp assembly (TM 10-3510-209-10).
2-160
