TM 10-3510-209-24
3-16. EXTRACTOR ASSEMBLY (CONT)
REPAIR (Cont)
m.
Lift basket (19) and gently install in
extractor. Turn basket slightly until it
engages with hex drive.
n.
Connect extractor drain line. Refer to
TM 10-3510-209-10.
o.
Lower extractor lid (18) to operating
position.
2.
Remove and replace brake solenoid.
WARNING
High voltage is present on this
equipment.
Do
not
perform
maintenance with power on. Death
or serious injury may result.
a.
Set extractor circuit breaker on the
electrical panel to the OFF position.
b.
Open extractor lid (18).
c.
Disconnect extractor drain. Refer to
TM 10-3510-209-10.
WARNING
Components
of
the
extractor
assembly are heavy and may be
awkward to handle. Use correct
lifting procedures, lifting devices,
and/or
assistance
from
other
personnel to avoid injury.
d.
Manually lift out basket (19).
e.
Refer to REPAIR, step Id, and remove
curb from base.
3-63
