TM 10-3510-209-24
3-24. DRYER ASSEMBLY
This task covers:
a. Removal
b. Installation
INITIAL SETUP:
Tools
General Safety Instructions
General mechanic's tool set
SC 5180-90
WARNING
Personnel Required
Dryer tumbler is heavy and may be awkward
to handle. Use correct lifting procedures,
MOS 63J (1)
lifting devices, and/or assistance from
other personnel to avoid injury.
Materials/Parts
Equipment Condition
Mounting hardware
TM 10-3510-209-10, Tarp assembly removed.
(as needed)
Paragraph 2-15, Left beam removed.
Plastic wire tires,
TM 10-3510-209-10, Platform removed.
(Item 11, App C)
REMOVAL
1.
Loosen three screws (1) and open control panel
door (2).
2.
Remove four screws (3) and cover plate (4).
3.
Loosen screws (5) on terminal board (6). Tag
and disconnect five incoming wires (7) from
terminal board.
4.
Cut and remove plastic wire ties as required.
3-112
