TM 10-3510-220-24
2-26. AIR COMPRESSOR (CONT)
INSTALLATION
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
Position air compressor (1) on platform
(20).
Install four bolts (18), washers (19),
lockwashers (17), and nuts (16).
Install conduit (14) and conduit nut
(13) on pressure switch (15).
Connect five input wires (12) coming
from conduit (14), Remove tags. Refer
to FIGURE 7, Appendix E.
Connect compressor-to-control unit
manifold air line (11) to air compressor
(1).
Turn on power to compressor.
Looking at rear of compressor check
for clockwise rotation.
Perform ADJUSTMENT procedures.
Install pressure switch cover (9) and
tighten captive acorn nut (8).
Perform follow-on installation.
If removed install pre-extraction bin
(para 2-28).
2-88
