TM 10-3510-220-24
2-29. EXTRACTOR ASSEMBLY (CONT)
SERVICE
b. Open lid (1).
WARNING
Extractor basket is heavy and awkward to
handle. Use a sufficient number of personnel to
2.
3.
lift extractor to avoid injury.
c. Manually lift extractor basket (2)
d .
e.
f.
from extractor assembly and set aside.
Remove two capscrews (3), flatwashers (4),
gaskets (5), capscrew (6), lockwasher (7),
and drain clamp (8).
Remove curb (9) from base (10).
Remove two screws (11), washers (12)
and remove access plate (13).
Lubricate in accordance with LO 10-
3510-220-12.
Assemble after lubrication as follows:
a.
b .
c.
d .
Install curb (9) on base (10) and
secure with drain clamp (8), lock-
washer (7), capscrew (6), two
gaskets (5), flat washers (4),
and capscrews (3).
Install extractor basket (2) and
rotate until basket drops.
Close lid (1).
Install access plate (13) on base (10)
and secure with two screws (11) and
washers (12).
2-93
