TM 10-3510-220-24
3-24. DRYER ELECTRIC CONTROL ASSEMBLY
This task covers:
a. Removal
b. Installation
INITIAL SETUP
Equipment Condition
Tools
TM 10-3510-220-10, Tarp assembly and
General mechanic’s tool kit
platform removed.
General Safety Instructions
Materials/Parts
WARNING
Plastic wire ties,
High voltage is present on this equipment. Do
(Item 11, App C)
not perform maintenance with power on.
Death or serious injury may result.
REMOVAL
1.
Remove thermoswitch control assembly.
WARNING
High voltage is present on the equipment. Do not perform maintenance
with power on. Death or serious injury may result.
a.
b.
c.
d.
Remove electrical power from the dryer.
Remove two screws (1) and cover (2) from electrical connector box (3) on dryer blower
motor (4).
Remove plastic wire ties as required.
Tag and disconnect electrical wires (5) from the terminals and connectors in electrical
connector box (3).
3-110
