TM 10 --3510--221--24
0209 00--1
SOLENOID VALVE REPLACEMENT
0209 00
THIS WORK PACKAGE COVERS:
Removal, Installation
INITIAL SETUP:
Maintenance Level
Materials/Parts
Unit
Tools and Special Tools
Equipment Conditions
Tool Kit, General Mechanics (Item 1, WP 0272 00)
LADS power must be shut off and door opened at
main control enclosure (WP 0112 00).
Air pressure must be vented (WP 0113 00).
REMOVAL
1. Disengage two latches (1), then open access door (2).
2. Close manual valve (3).
3. Open petcock (4), allow product air to vent, then close petcock.
4. Disconnect electrical connector (5) from solenoid valve (6).
5. Remove two screws (7), then remove solenoid valve (6) from solenoid manifold (8).
6. Remove gasket (9) from solenoid manifold (8) and discard gasket.
2
1
3
4
ROTATED 90_