TM 10--3510--221--24
0222 00--2
AIR COMPRESSOR INVERTER REPLACEMENT -- Continued
0222 00
1
2
10
6
9
8
11
3
5
4
7
INSTALLATION
1. Loosen captive screw (1), then remove cover (2) from new inverter drive (3).
2. Unplug display PCB (6) from inverter drive (3).
3. Position inverter drive (3) on inside of door (10) the secure with two screws (8) and nuts (9).
4. Connect wiring at terminal strip (5) as tagged.
5. Connect wiring at connector (7) as tagged.
6. Plug display PCB (6) into inverter drive (3) ensuring that hole on display PCB is aligned with standoff (11).
7. Route control wiring through cover (2).
8. Install cover (2) onto inverter drive (3) then tighten captive screw (1).
9. Turn handle (12) CW, then close door (10).
10. Secure door (10) to main control enclosure (13) by tightening eleven latches (14).
11. Use maintenance menu to air system (WP 0010 00).
END OF WORK PACKAGE