TM 10--3510--221--24
0010 00--5
LAUNDRY ADVANCED SYSTEM
MAINTENANCE MENU OPERATION -- Continued
0010 00
TABLE 2. Discrete Inputs Data -- Continued.
DEVICE
FUNCTION
STATUS
ZS103A
Drum A Balance Switch
OFF = Drum Balanced/ON = Drum
Not Balanced
ZS103B
Drum B Balance Switch
OFF = Drum Balanced/ON = Drum
Not Balanced
ZS200
Still Doors Position Switch
OFF= Door(s) Open/ON= Doors
Closed
C. CONTROLLING OUTPUTS
NOTE
Operation of the air system and heating system can be checked using this function as well
as operation of individual motors, valves, and other components listed in Tables 3, 4, and 5.
1. Monitor display, it should read:
CONTROL MOTORS
CONTROL OUTPUTS
CONTROL VALVES
RETURN
CONTROL OTHERS
2. Press appropriate MENU SELECTION switch as follows:
a. Select CONTROL MOTORS to operate individual motors and pumps. Proceed to step 3.
b. Select CONTROL VALVES to operate individual air--actuated ball valves and solenoid valves. Proceed to
step 7.
c. Select CONTROL OTHERS to operate discrete outputs or test air or heating systems. Proceed to step 11.
d. Select RETURN to exit control outputs function and return to step A5.
3. Monitor display, it should read:
PREVIOUS MOTOR
CONTROL MOTORS
NEXT MOTOR
RETURN
M100A TUMBLE= OFF
START MOTOR
