TM 10-3510-222-24
3-31. INTERVAL TIMER - continued.
(3)
Window (17).
(a)
Remove twelve screws (1) from cover (2) and remove cover (2).
(b)
Remove four screws (15), washers (16) and remove window (17).
(c)
Position new window (17) on interval timer (7) and install four washers (16) and screws (15).
c.
INSTALLATION
(1)
Position interval timer (7) on front of control panel (8).
(2)
Install four washers (6), screws (5), clamps (4) and two nuts (3).
NOTE
Wire numbers are stamped on each electrical wire. This information, in conjunction with data on
FO-2 Washer Wiring Diagram, may be used to connect wires if tags are lost or illegible.
(2)
Connect electrical wiring as tagged.
(3)
Position cover (2) and install twelve screws (1).
3-72
