TM 10-3510-222-24
3-46. DRIVE UNIT ASSEMBLY.
This task covers:
a.
Removal
b.
Repair
c.
Installation
INITIAL SETUP
Tools
General Mechanics Tool Kit (App B, Item 1)
Automotive Vehicle Shop Equipment
(App B, Item 3)
Materials/Parts
Tags (App D, Item 4)
Personnel Required
Two
Equipment Condition
Laundry Unit shut down (TM 10-3510-222-10)
Basket and Curb removed (Para 2-39)
General Safety Instructions
WARNING
Voltage in this equipment is high enough to cause
serious injury or death. Do not perform this task with
power on.
a.
REMOVAL
(1)
Tag and disconnect wires from solenoid (12).
(2)
Remove six screws (1), lockwashers (2) and three caps (3).
(3)
Remove four screws (4), lockwashers (5) and two caps (6).
(4)
Mark position of drive unit assembly in relation to frame (9).
(5)
Lift drive unit assembly (7) out of frame (9).
(6)
Remove three bumper caps (8) from drive unit assembly (7).
(7)
Mark frame (9) in relation to skirt (11).
(8)
Remove frame (9) from skirt (11).
(9)
Remove two rubber trunnions (10) from frame (9).
b.
REPAIR
Repair of drive unit consists of repair of brake (Para 3-47) and oil housing (Para 3-48).
c.
INSTALLATION
(1)
Position two rubber trunnions (10) on frame (9).
(2)
Position frame (9) in skirt (11) as marked.
(3)
Position three bumper caps (8) on drive unit assembly (7).
(4)
Position drive unit assembly (7) on frame (9).
(5)
Install two caps (6), four lockwashers (5) and screws (4).
(6)
Install three caps (3), six lockwashers (2) and screws (1).
3-106
