TM 10-3510-222-24
3-47. EXTRACTOR BRAKE.
This task covers:
a.
Disassembly
b
Repair
c.
Assembly
INITIAL SETUP
Tools
General Mechanics Tool Kit (App B, Item 1)
Automotive Vehicle Shop Equipment
(App B, Item 3)
Materials/Parts
Cotter Pin (App C, Item 74)
Personnel Required
Two
Equipment Condition
Laundry Unit shut down (TM 10-3510-222-10)
Basket and Curb removed (Para 2-39)
General Safety Instructions
WARNING
Voltage in this equipment is high enough to cause
serious injury or death. Do not perform this task
with power on.
a.
DISASSEMBLY
(1)
Remove screw (1) and lockwasher (2). Loosen screw (56) and pivot bracket (58) to loosen spring (3).
(2)
Remove spring (3).
(3)
Remove two retaining rings (4) and flat washers (5).
(4)
Remove brake shoe (6).
(5)
Remove insert (7) and basket ball (8).
(6)
Remove seal (9).
(7)
Loosen three setscrews (10) on collar (11) and remove collar.
(8)
Loosen two setscrew (12) on drum (13) and remove drum and key (14).
(9)
Remove two screws (15) and lockwashers (16), flat washers (17) and bracket (18).
(10)
Remove cotter pin (19), shoulder pin (20) and three spacers (21 and 22) and link (23).
(11)
Remove nut (24), unscrew hook (25) and remove nut (26) from hook (25).
(12)
Remove nuts (27) and flat washer (28) from stud (55).
(13)
Remove arm (29) and remove nut (30) and bolt (31) from arm (29). Disconnect hook (25) from link (23).
(14)
Remove nuts (32 and 33) and hook (34).
(15)
Tag and disconnect wires from solenoid (35) and remove four screws (36), lockwashers (37) and solenoid (35).
(16)
Remove two screws (38) and lockwashers (39), plate (40) and two spacers (41).
(17)
Remove pin (42) and stud (43).
(18)
Remove screw (44), nut (45) and bracket (46).
(19)
Remove nut (47), lockwasher (48) and stud (49).
(20)
Remove bell crank (50) and flat washer (51). Remove grease fitting (52) from bell crank (50).
3-108
