TM 10-3510-224-13&P
0009 00
Table 1. Preventive Maintenance Checks and Services for the CSSL-Continued.
0009 00-6
Item
No.
Interval
Item to be
checked or
serviced
Procedure
Equipment not ready/available if:
19
After
Washers/Dryers
Open each washer (1) to determine if
they contain any water that has not
drained properly, or any clothing or other
items. If necessary, drain any water by
activating the washer. Check, and if
needed, clean out the dryer lint traps (4).
Not ready if washers contain water or items
from previous use, If hoses are corroded,
clogged, leaking or otherwise damaged.
20
After
Water Service
Panel
Check the freshwater panel (6) and the
wastewater panel (7) for damage, leaks
and corrosion.
Not ready if panel, hoses or fittings are
damaged or corroded.
21
After
Interior Lights
Replace any burned out light bulb (9) as
required. Notify Unit Maintenance of a
defective or questionable light switch.
Light fixtures or light switch inoperative.
22
23
After
After
Vent Fan
Space Heater
Ensure Vent Fan (10) is clear and free of
debris. Notify Unit Maintenance of
defective Vent Fan.
If Space Heater (11) is inoperative, rotate
the control knob (12) fully in both
directions. If heater does not respond,
notify Unit Maintenance.
Vent Fan inoperative or noisy.
Space Heater damaged or inoperative.
24
After
Power Entry Panel Ensure that connectors are secure and
that no damage has occurred to the panel
(13). Notify Unit Maintenance of any
damage to the panel or to the connectors.
Damaged panel or connectors. Improper or
loose connections. Missing or damaged
hardware.
25
After
TEMPER Modified
Endwall Boot
Ensure that cinch straps and tie downs
are secure. Check for torn or damaged
fabric. Ensure that hook and pile closures
are secure.
Torn fabric, loose, damaged or missing straps.
26
After
Circuit Breakers
If circuit breaker trips, reset the circuit
breaker. If the problem persists, notify
Unit Maintenance.
Circuit breakers damaged or non-functioning.
