TM 10-3510-209-24
2-46. DRYER FUEL FILTER ASSEMBLY (CONT)
REMOVAL (Cont)
WARNING
Fuel is toxic and flammable. Failure
to cap disconnected fuel lines could
result
in
flammable
fuel
being
siphoned
onto
the
ground
and
equipment.
3.
Disconnect input fuel line (1) and output fuel line
(2) from fuel filter (7).
4.
Install fuel line caps on input fuel line (1)and
output fuel line (2).
4.
Remove drain plug (3) and drain fuel into a fuel
container.
6.
Install drain plug (3).
7.
Remove two bolts (4), washers (5), nuts (6), and
fuel filter (7) from dryer.
REPAIR
1.
Repair of fuel filter consists of replacing defective components. Remove and replace only those items necessary
to make repair.
2.
If replacement of individual parts is not practical, replace the fuel filter.
INSTALLATION
1.
Install fuel filter (7) on the dryer and secure with two bolts (4), washers (5), and nuts (6).
2.
Connect output fuel line (2) to the outlet of fuel filter (7).
3.
Install input fuel line (1) to the inlet of fuel filter (7).
4.
Return two fuel line caps to the storage bin.
CAUTION
Support the fuel bowl while loosening the servicing screw to prevent damage to
the bowl.
5.
Loosen the servicing screw until the fuel bowl can be removed.
6.
Replace the fuel filter cartridge.
7.
Place the fuel bowl on the fuel filter (7) and tighten the servicing screw.
NOTE
FOLLOW-ON MAINTENANCE:
Install tarp assembly (TM 10-3510-209-10).
2-167
