TM 10-3510-209-24
2-48. DRYER AIR SHUTTER ASSEMBLY
This task covers:
a. Inspection
b. Removal
c. Repair
d. Installation
Initial Setup:
Tools
General Safety Instructions
General mechanic's tool set
SC 5180-90
WARNING
Personnel Required
High voltage is present on this equipment.
Do not perform maintenance with power on.
MOS 63J (1)
Death or serious injury may result.
Materials/Parts
Equipment Condition:
Air shutter assembly
TM 10-3510-209-10, Tarp assembly removed.
INSPECTION
Inspect air shutter for binding, damage and unusual noise or vibration.
WARNING
High voltage is present on this equipment. Do not perform maintenance with
power on. Death or serious injury may result.
REMOVAL
1.
Remove thumbscrew (1) and shutter (2) from air intake housing (5).
2.
Remove four capscrews (3), lockwashers (4), and air intake housing (5) with filter screen (6) from blower housing
(9).
3.
Remove eight fan capscrews (7), lockwashers (8), and blower housing (9) from flange (17).
4.
Loosen setscrew (10) and remove coupling (11) from shaft of motor (18).
5.
Loosen setscrews (12) and remove blower impeller (13) from shaft of motor (18).
6.
Remove key (14) from shaft of motor (18).
7.
Remove four capscrews (15), lockwashers (16), and flange (17) from motor (18).
2-172
