TM 10-3510-209-24
2-49. DRYER TUMBLER DRIVE MOTOR AND GEARBOX ASSEMBLY
This task covers:
a. Service
b. Adjustment
Initial Setup:
Tools
General Safety Instructions
General mechanic's tool set,
SC 5180-90
WARNING
High voltage is present on this equipment. Do not perform maintenance
Personnel Required
with power on. Death or serious injury may result.
MOS 63J (1)
Equipment Condition
Materials/Parts
TM 10-3510-209-10, Tarp assembly removed.
Lubricating oil
(Item 17, App C)
Lubricating oil, multipurpose
(Item 18, App C)
SERVICE
NOTE
See LO 10-3510-209-12 for lubrication figures.
1.
Change gearbox oil.
WARNING
High voltage is present on this equipment. Do not perform maintenance with
power on. Death or serious injury may result.
a.
Remove electrical power from dryer.
b.
Remove three screws (1) and drive chain guard (2).
c.
Position a container under drain plug (3) on the bottom side of gear reduction unit (4).
d.
Remove drain plug (3) from gear reduction unit (4).
e.
Remove filler plug (5) from top front of gear reduction unit (4).
f.
Remove level plug (6) from gear reduction unit (4).
g.
Clean drain plug (3).
h.
After all oil is drained from gear reduction unit (4), install drain plug (3) in bottom of unit.
2-174 Change 1
