TM 10-3510-209-24
3-16. EXTRACTOR ASSEMBLY (CONT)
REMOVAL (Cont)
2.
Loosen two screws (3) and remove cover (4)
from electrical box (5).
3.
Tag and disconnect three wires (6) from circuit
breaker (7) and one wire from ground screw (8).
Remove nut (9), conduit, and wires from
electrical box (5).
4.
Remove five capscrews (10), lockwashers (11),
and flat washers (12) from small legs (13).
5.
Remove four capscrews (14), lockwashers (15),
and flat washers (16) from large legs (17).
6.
Use lifting straps and hoist and remove the
extractor from the laundry trailer.
3-60
