TM 10-3510-209-24
3-16. EXTRACTOR ASSEMBLY (CONT)
REPAIR (Cont)
f.
Remove two snaprings (29) from brake
arm pivot (30) and anchor stud (31).
g.
Use brake arm (32) and manually push in
brake solenoid plunger (33), releasing
brake pressure.
h.
Pry off brakeshoe (28) at pivot points and
clean the pivot points with a clean cloth.
i.
Install new brakeshoe (28) with lubrication
points (34) aligned in the direction shown
and install snaprings (29).
j.
Lubricate the brakeshoe pivot points.
Refer to LO 10-3510209-12.
k.
Adjust brakeshoe. Refer to paragraph
2-28.
l.
Install curb (26) on base (27). Secure with
capscrew (23), lockwasher (24), drain
clamp (25), two brass bolts (20), flat
washers (21), and gaskets (22).
3-62
