TM 10-3510-220-24
2-31. EXTRACTOR DRIVE BELT
This task covers:
a. Adjustment
b . Repair
INITIAL SETUP
Equipment Condition
Tools
TM 10-3510-220-10, Work platform removed
General mechanic’s tool kit
from transport position.
General Safety Instructions
WARNING
High voltage is present on this equipment.
Do not perform maintenance with power
on. Death or serious injury may result.
ADJUSTMENT
Adjust drivebelt.
a. Remove screw (7), lockwasher
(6), and slide belt guard (5)
away from machine.
b. Pull motor hanger (1) aw
c.
from machine and relieve
tension on spring (3).
Swing tension bolt (2) to
spring away from motor.
CAUTION
Do not overtighten belt. It should be as
loose as possible without slipping
during startup.
If drivebelt (4) is slipping, add two
or three flat washers (1/2-inch [12.7 mm]
inside diameter) behind spring (21).
2-98
