TM 10-3510-220-24
2-30. EXTRACTOR DRIVE UNIT (CONT)
REMOVAL
WARNING
High voltage is present on this
equipment. Do not perform
maintenance with power on.
Death or serious injury may result.
1. Twist two cam locks (6) and
remove electrical box cover (5).
N O T E
Wire connections must be tagged
to ensure proper connection for
reassembly.
2. Tag and disconnect four electrical
wires (4) from motor switch (2).
3.
Remove plastic nut (8), conduit nut
(7), and conduit (3) from box (1).
WARNING
Electric motor is heavy and awkward
to handle. Use correct lifting proce-
dures, indicated lifting devices, and/
or assistance from other personnel
to avoid injury.
4. Lift motor (11) with mount (17)
upward and out of hinge pin holes
in rear leg (18).
2-96
