TM 10-3510-220-24
2-30.
EXTRACTOR DRIVE UNIT (CONT)
REMOVAL (Cont)
5.
6.
7.
8.
9.
Remove two capscrews (10),
lockwashers (9), and mount
(17) from motor (11).
Remove two acorn nuts (14)
and remove cover (15) from
connection box (16).
Tag and disconnect four
electrical wires (4).
Remove conduit nut (13)
and remove conduit (3).
Remove elbow (12) from conduit (3).
10. Reinstall elbow (12) conduit (3)
conduit nut (13) and connect
wires (4) to new motor (11).
11. Reinstall cover (15) and secure
with two acorn nuts (14).
INSTALLATION
1.
2.
3.
4.
5.
6.
Install mount (17) on motor (11) and
secure with two capscrews (10) and
lockwashers (9).
Lift motor (11) with mount (17) and
install in hinge pin holes of rear leg (18).
Install conduit (3) with electrical
wires (4) in box (1). Install conduit
nut (7) and plastic nut (8).
Connect four electrical wires (4)
to motor switch (2). Remove tags.
Install electrical box cover (5) on
box (1) and twist two cam locks (6).
Perform follow-on installation.
Install drivebelt (para. 2-29).
2-97
