TM 10-3510-220-24
2-47.
DRYER FUEL FILTER ASSEMBLY (CONT)
REMOVAL
WARNING
High voltage is present on this equipment.
Do not perform maintenance with power
on. Death or serious injury may result.
WARNING
Failure to cap disconnect fuel lines could
result in fuel being siphoned onto the
ground and equipment.
WARNING
Fuel is toxic and flammable. Spilled fuel is
a fire hazard and eye irritant. Wipe up
spills to avoid injury and fire.
1. Disconnect hose (1) from small nipple (2).
2. Disconnect hose (5) from large nipple (4).
3. Remove two nuts (9), lockwashers (8), screws
(7), flat washers (6), and brace (10) from
mounting brackets (11).
4. Remove nipples (2) and (4) from fuel filter (3).
REPAIR
1. Remove two nuts (16), lockwashers
2.
3.
(17), screws (21), and brace (10) from
fuel filter (3).
Remove four screws (15) securing
plate (18), filter bowl (19), and gasket
(20), from fuel filter (3).
Remove handle (12), nipple (13), and
two preformed packings (14) from fuel
filter (3).
2-169
