WATER PUMP AND MOTOR ASSEMBLY - TM-10-3510-220-24

WATER PUMP AND MOTOR ASSEMBLY (CONT) - TM-10-3510-220-24_230

TM-10-3510-220-24
Page Navigation
212

TM 10-3510-220-24 2-53. WATER PUMP AND MOTOR ASSEMBLY SERVICE (Cont) 2. Remove strainer (4) from strainer housing (5). 3. Remove half coupling (6) from strainer housing (5). 4. Remove strainer housing (5) and nipple (7) from pump (1). NOTE Use thread sealer compound (Item 5, App C) when joining pipes and fittings. 5. Wash strainer thoroughly with clear water. Replace strainer if damaged or missing. 6. Install nipple (7) and strainer housing (5) on pump (1). 7. Install half coupling (6) on strainer housing (5). 8. 9. Install strainer (4) in strainer housing (5). Install O-ring (3) and cap (2). REPAIR Repair water outlet assembly by replacing the defective component. Use these procedures in preparation for replacing the water pump. Disassemble only as necessary. 2-189

Privacy Statement
Press Release
Contact