TM 10-3510-220-24
2-52. WATER PUMP AND MOTOR ASSEMBLY (CONT)
REPAIR (Cont)
5. Replace water pump frame if bent or broken.
a.
b.
c.
d .
e.
f.
g.
h.
Remove receptacle and limit switch (refer to REPAIR paragraph 3).
Remove conduit from switch box
(refer to REPAIR paragraph 3).
Remove water pump and motor (refer to
REPAIR paragraph 4).
Remove two nuts (45), two lockwashers (44),
two screws (43), and switch box (18) from
frame (37).
Position switch box (18) on frame (37) and
secure with two screws (43), two
lockwashers (44), and two nuts (45).
Install water pump and motor (refer to
REPAIR paragraph 4).
Install conduit in switch box (refer to
REPAIR paragraph 3).
REPLACE
Install receptacle and limit switch (refer to
REPAIR paragraph 2).
1. Replace water pump and motor, if damaged
beyond repair.
2. Perform follow-on installation.
Install water pump (TM 10-3510-220-10).
2-194
