TM 10--3510--221--10
0018 00--7
WASHING/DRYING SYSTEM TROUBLESHOOTING --
Continued
0018 00
R1 or WASH TANK NOT FILLING -- Continued
7.
Check caps on water tank manifolds.
Are caps installed?
YES Go to step 8.
NO Properly install cap(s). Return to normal operation.
8.
Check all water hose connections for signs of leakage.
Are any leaks found?
YES Repair as necessary or notify maintenance.
NO Notify Maintenance.
9.
Check for debris in water pump strainer (WP 0028 00).
Is strainer clean?
YES Go to step 10.
NO Clean and replace strainer. Return to normal operation.
10. Check for presence of standing water inside drum.
Is standing water visible through window in drum door?
YES Go to WATER NOT DRAINING FROM DRUM FAULT.
NO Go to step 3.
R1, R2, or WASH TANK NOT EMPTYING
1.
Use MENU SELECTION switch (WP 0008, Figure 2, 7) to select PAUSE.
2.
Check for debris in water pump strainer (WP 0028 00).
Is strainer clean?
YES Go to step 3.
NO Clean and replace strainer. Return to normal operation.
3.
At operator panel where cycle was paused press MENU SELECTION switch (7) to CONTINUE
CYCLE.
Does water drain from drum?
YES Return to normal operation.
NO Notify Maintenance.
