TM 10-1670-300-20&P
TO 14D1-2-469-2
NAVAIR 13-1-42
2-17.
RELEASE, ASSEMBLY, RIPCORD, AUTOMATIC, TYPE FF2.
This task covers:
a.
Reset
b.
Service
c.
Test
d.
Adjust
e.
Replace
INITIAL SETUP
Tools:
Tool kit, FF-2 (Appendix B, Section III, Item 4)
Reset key
Test arming pin
Stopwatch, ten-second sweep (Appendix B, Section III, Item 6)
Torque Driver (Appendix B, Section III, Item 9)
Stirrup cocking tool (Appendix B, Section III, Item 5)
Test chamber (Appendix B, Section III, Item 7)
Test scale (Appendix B, Section III, Item 8)
Materials/Parts:
Withdrawal hook
Power cable
Arming pin assembly
Lanyard (type III nylon cord) (Appendix D, Item 6)
Case screws
Power cable lock nut
Power cable washer
Timing set screws
Rubber seal, upper, main spring and plunger barrel
Rubber seal, lower, main spring and plunger barrel
Arming pin guide bush
Arming pin guide bush seal
Methyl Ethyl Ketone (Appendix D, Item 13)
Cyanoacrylate instant cure adhesive (Appendix D, Item 7)
Sealant, 20/20 or eq. (Appendix D, Item 16)
Loctite (Appendix D, Item 12)
2-35
