TM 10-3510-209-24
2-21. WASHER INTAKE PLUMBING AND DRAIN ASSEMBLY
This task covers:
a. Inspection
b. Removal
c. Installation
INITIAL SETUP
Tools
General Safety Instructions
General mechanic's tool set,
SC 5180-90
WARNING
Soldering torch
Soldering procedures specified may cause burns if safety precautions
are not followed. Wear protective clothing and eye wear while perfor-
Personnel Required
ming soldering procedures.
MOS 63J (2)
Equipment Condition
Materials/Parts
TM 10-3510-209-10, Water drained.
Solder (Item 9, App C)
TM 10-3510-209-10, Air tank drained.
Petrolatum (Item 8, App C)
TM 10-3510-209-10, Quick disconnect hoses removed.
Crocus cloth (Item 2, App C)
Identification tags (Item 12, App C)
INSPECTION
Inspect for cracks, freeze breaks, corrosion, loose
fittings, and loose mounting.
REMOVAL
1.
Remove washer intake plumbing.
a.
Remove intake coupling (1) from elbow
(2).
b.
Remove two nuts (3), lockwashers (4),
screws (5), and clamp (6) securing pipe
(8) to bracket (7).
c.
Remove elbow (2) from pipe (8).
d.
Remove pipe (8) from elbow (9).
e.
Remove elbow (9) from washer (10).
Change 1 2-79
