TM 10-3510-209-24
2-21. WASHER INTAKE PLUMBING AND DRAIN ASSEMBLY (CONT)
INSTALLATION
1.
Install washer drain assembly.
a.
Install tee pipe (41) on drain pipe (24).
b.
Install nipples (40) and (39) on tee pipe
(41).
c.
Install dump valve (38) on nipple (40).
d.
Install elbows (37 and 14) on dump valve
(38).
e.
Install adapter (36), coupling (35), and cap
(34) on elbow (37).
f.
Install dump valve (33) on nipple (39).
g.
Install elbows (13 and 32) and adapter
(31) on dump valve (33).
h.
Install drain pipe assembly (30) on
adapter (31).
i.
Check that rear clamp (22A) is secure on
washer drain hose (23).
j.
Place front clamp (22) loosely on front of
washer drain hose (23).
k.
Install drain pipe assembly (28) on washer
frame (29) and into washer drain hose (23). Secure with
four screws (27), lockwashers (26), and nuts (25).
I. Connect hose (23) to drain pipe (24) and
secure with front clamp (22).
m.
Install clamp (20), two screws (19),
lockwashers (18), and nuts (17) securing drain pipe
assembly (28) to bracket (21).
n.
Connect union joint (15) to extractor drain
pipe (16).
o.
Connect air hose (11) and (12) to
elbow(13) and (14). Remove tags.
2-82 Change 1
