TM 10-3510-209-24
2-21. WASHER INTAKE PLUMBING AND DRAIN ASSEMBLY (CONT)
REMOVAL (Cont)
2.
Remove drain assembly.
NOTE
Disassemble drain pipe assembly
only when evidence of damage is
present.
a.
Tag and disconnect air hoses (11) and
(12) from elbow (13) and (14).
b.
Disconnect union joint (15) from extractor
drain pipe (16).
c.
Remove two nuts (17), lockwashers (18),
screws (19), and clamp (20) from bracket (21).
d.
Remove hose clamp (22).
e.
Remove four nuts (25), lockwashers (26),
screws (27), and drain assembly (28) from washer frame
(29) and hose (23).
f.
Remove drain pipe assembly (30) from
adapter (31).
g.
Remove adapter(31) and elbow(32) from
dump valve (33).
h.
Remove elbow (13) from dump valve (33).
i.
Remove dump valve (33) from nipple (39).
j.
Remove cap (34), coupling (35), and
adapter (36) from elbow (37).
k.
Remove elbow (37) from dump valve (38).
I.
Remove elbow (14) from dump valve (38).
m.
Remove dump valve (38) from nipple (40).
n.
Remove nipples (39) and (40) from tee
pipe (41).
o.
Remove tee pipe (41) from drain pipe
(24).
Page 2-81 deleted
2-80 Change 1
