TM 10-3510-220-24
2-44. DRYER TUMBLER ASSEMBLY (CONT)
REPAIR (Cont)
5. Repair thermostatic high temperature switch.
WARNING
High voltage is present on this equipment. Do
not perform maintenance on thermostatic
high temperature switch with power on.
Death or serious injury may result.
NOTE
Repair thermostatic high temperature switch
by replacing the unserviceable switch with a
new one.
a. Disconnect electrical power from the dryer.
b. Inspect thermostatic high temperature
switch (4) for damage and loose connections.
c. Remove sleeve (2), nut (1) and cover (3) from
the thermostatic high temperature switch (4).
d. Tag and remove two wires (7) from the
thermostatic high temperature switch (4).
e. Remove the lock nut (5) and the conduit (6)
from the thermostatic high temperature switch (4).
f. Remove the thermostatic high temperature
switch (4) from the dryer by turning it
counterclockwise.
g. Install the new thermostatic high
temperature switch (4) by turning the switch
clockwise into the dryer.
h. Install the conduit (6) and the lock nut (5)
onto the thermostatic high temperature switch (4).
i. Connect two wires (7) to the thermostatic
high temperature switch (4).
j. Replace the cover (3), nut (1) and the sleeve
(2) to the thermostatic high temperature switch (4).
6. Perform follow-on installation.
Install tarp assembly (TM 10-3510-220-10).
2-160
