TM 10-3510-220-24
2-44. DRYER TUMBLER ASSEMBLY (CONT)
REPAIR (Cont)
WARNING
Fuel is toxic and flammable. Pressurized fuel is
released when valve is opened. Personal injury
can result if adequate precautions are not taken.
Wear protective eyewear and keep open flame
and sparks away.
b. Close fuel shutoff valve (64).
c. Open fuel drain valve (52) on fuel pump (53) and
relieve pressure. Close the valve.
d. Disconnect two fuel lines (60) from fitting (61)
and elbow (67) and street-L (71).
e. Remove six screws (57) and remove cover (56)
and gasket (58) from junction box (55).
NOTE
Record wire removal so that installation of wires
on the replacement solenoid is exactly
duplicated.
NOTE
The solenoid is solid state. The wires are already
installed.
f.
g.
h.
i.
j .
k.
Tag and disconnect two wires
(54) coming from junction box (55).
Remove two mounting screws (63)
and lockwashers (65).
Remove solenoid (69), with
attached parts, and conduit (59)
from bracket (62).
Remove elbow (67), street-L (71), fitting
(66) and nipple (68) from solenoid (69).
Remove conduit (59) from
solenoid (69) and wires (54).
Install nipple (68), elbow (67), fitting
(66) and street-L (71) on solenoid (69).
2-158
