TM 10--3510--221--10
0018 00--10
WASHING/DRYING SYSTEM TROUBLESHOOTING --
Continued
0018 00
WATER NOT DRAINING FROM DRUM
1.
Use MENU SELECTION switch (WP 0008, Figure 2, 7) to select PAUSE.
2.
Check for debris in water pump strainer (WP 0028 00).
Is strainer clean?
YES Go to step 3.
NO Clean and replace strainer. Return to normal operation.
3.
Disconnect hose from drain port at bottom of drum the check for debris block drain port or hose.
Is drain port or hose blocked with debris?
YES Remove blockage. Go to step 4.
NO Go to step 4.
4.
Reconnect hose to drain port at bottom of drum.
5.
At operator panel where cycle was paused press MENU SELECTION switch (7) to CONTINUE
CYCLE.
Does water drain from drum?
YES Return to normal operation.
NO Notify Maintenance.
WATER VISIBLE AT REAR SEAL OF DRUM
1.
Use appropriate MENU SELECTION switch (WP 0008, Figure 2, 7) to select PAUSE.
2.
Check for presence of standing water inside drum.
Is standing water visible through window in drum door?
YES Go to WATER NOT DRAINING FROM DRUM FAULT.
NO Go to step 3.
3.
Lubricate rear drum seal (WP 0041 00).
4.
At operator panel where cycle was paused press MENU SELECTION switch (7) to CONTINUE
CYCLE.
5.
Observe rear drum seal during extract portions of laundry cycle.
Does water come out of rear drum seal?
YES Notify Maintenance.
NO Return to normal operation.
