TM 10-7360-226-13&P
0017 00
CONTAINERIZED KITCHEN (WITH TRAILER)
UNIT MAINTENANCE PROCEDURES
Despooling Brackets
Winch Reel
Mounting Bolt
Figure 4. Winch Installation (Cable Omitted For Clarity)
NOTE
Some CK units do not have the despooling bracket installed. If the CK unit has a
despooling bracket, you will need a socket extension.
3. Through the inside winch access panel, using a 9/16" socket remove the winch mounting
bolt, flat washer, lock washer, and the despoiling bracket.
4. Remove the winch assembly by pushing the top of the winch assembly towards the outside
wall, and pull the bottom part of the winch assembly toward the CK interior as you are lifting
up the winch assembly.
5. Place the winch assembly on the CK floor. Remove winch handle, winch socket, and winch
socket hex screw and retain for installation of the replacement winch. Use a 7/16" socket on
the hex head screw, while securing the pinion shaft to hold it steady (refer to Figure 3).
Twist off the winch socket and retain for installation on the new winch assembly.
NOTE
There's a spacer inside the winch socket, make sure to retain it.
Change 2
0017 00-8